OSX86 online Support

OSX86 online Support is finally here!

 Starting tommorrow (27.09.2011) I (ShayBC) will be available to support your hackintosh / OSX86 problems at: http://doupto.com/169346 look for my service (also: http://doupto.com/169345), its only 5$ to solve your problem and i will personally help each and every one of you that will order with your problem regarding OSX86 / Hackintosh / Mac or every other OSX related problem, if you have question or want to understand how my support will help you, you can contact me on http://doupto.com/

please note that i will support issues regarding:

OSX86 (Usage, Install, Boot, Crash, how-to, general questions)

Hardware issus (hackintosh/macbooks/iMacs)

Driver/Kext problems

OSX (Tiger / Leopard / Snow Leopard / Lion)

Parallels / VMWare

IOS devices

Objective-C development

IOS Devices development

...and any related issue

ShayBC.

Still waiting for root device II

This post is a continue part of my previouse "Still waiting for root device" post that covered several solutions including:

• use RD=DiskXsY darwin switch
• BIOS configuration
• flag OSX86 partition as bootable

this post will display more good options to get pass this error, starting with the simplest:

1. Download another distribution
the simplest solution is sometimes the less obviouse, although you probably thinking "what good can another copy of Hackintosh do for my hardware compatability error?" well the thing is that OSX86 is a shrinked OSX with hacked, tweaked, opensource drivers for a PC, this what makes you PC compatible with OSX, one distribution does not include the same drivers as the other, also versions of the same published contains different drivers, for instamce Leo4All_v2 may work on your machine but Leo4All_v3 might not. so be sure to download as much distributions you can until your problem is solved.

2. Plug USB/Firewire drive (even DiskOnKey)
another simple solution is to plug an external drive like a USB or Firewire drive or even a USB DiskOnKey (size doesn't matter, in this case anyway) in your USB port and reboot the system, with the Hackintosh OSX86 DVD in the DVD drive, once the darwin countdown appear press F8 in order to get the boot prompt and use the RD=DiskXsY switch (switch use is explained in this post in greater details) and point the disk number and partition number to the external drive. this solution is only to get the installtion started, not a permanent solution, after the installation is running you can choose different combination of drivers until the installed system will load without the need to use the USB plug trick.

3. Use External DVD
if you can access external DVD drive or a SATA drive then try using it, most of the times the problem is hardware inconsistency with the driver installed on the DVD, this means that you might have a DVD that the booting driver set (this set is different then the driver it contains in order to install on your system) includes SATA harddrive driver, and your harddrive might be SATA but the DVD is IDE, and ofcource it can be vice versa, that the HD is IDE and the DVD is SATA and driver is one of them (IDE/SATA), so try to make it consistent, use the same HD and DVD type (even by plugging external DVD so it will be USB instaed of SATA or IDE) and find a distribution that will load them.

4. Play with Master/Slave settings
sometimes when your PC contains IDE hraddrive and IDE DVD you need to play with the master slave configuration (use this option only if you know what it means, this option involve openning the PC case and play with harddrive/DVD jumpers)

5. More darwin swiches to try
there are more swich you can try beside rd=diskXsY, you can read about them in this post, try these next swiches: platform=X86PC -x -f cpus=1, try them in different combinations until you succeed.

6. Create an HFS+ partition prior to the installation
if the installation cannot find your root device although you tried previouse sulutions then try creating an HFS+ partition and point to it using the rd=diskXsY at boot time.

from windows create a partition of AF type (HFS+ type), do it like this:

• from windows press Start->run and write: cmd and press enter
  
• write diskpart and press enter


• write: list disk (it will display all available HD)


• select the number of the one you want to install Leopard on like this: write: select disk NUM_OF_DISK and press enter (replace NUM_OF_DISK with the number of the disk you want)


• next write: list partition and press enter


• it will display all the partitions on that disk, now delete the partition you planed to install on like this: delete part NUM_OF_PART and press enter (replace NUM_OF_PART with the partition you wanted to install leopard on), if you don't have such partition then skip to the next part


• create a partition of the AF type like this: write: create partition primary id=AF and press enter


• write: active and press enter


• reboot and try to load the installation from the DVD again

7. Copy the Extensions folder from DVD to the Harddrive
this solution is for all of you that got the "Still waiting" error after the installation processed finished and first reboot occurred. if this is your case then it means that you have succeeded to boot into the DVD inorder to install (so the correct drivers for your system reside in the DVD boot extensions folder) but when you finished installing the drivers you selected they just won't boot and the Still waiting for root device appears, then all you have to do is to copy the DVD boot extensions folder into your installed copy and by that boot from your harddrive using the DVD drivers, do it like this:

boot from the install DVD, from utilities menu item select the terminal and write the following commands, but replace the word Leopard with your installation partition name (you set it during installation):
cd /System/Library
mv /Volumes/Leopard/System/Library/Extensions /Volumes/Leopard/System/Library/Extensions.bak
cp -R Extensions /Volumes/Leopard/System/Library
cd /Volumes/Leopard/System/Library
chmod -R 755 Extensions
chown -R 0:0 Extensions

after this the system should be able to boot on its own, you may need to flag the partition as bootable read how to do this here.

8. Change the ATA driver on the DVD
this last suggestion is very good but very hard to nail. it involves hacking the IOATAFamily.kext. this is the kext that is responsible for the attached hardware on your machine (ATA= AT Attachments, SATA = Serial ATA) like IDE hard drives or CD/DVD we will insert your controller Vendor ID and Device ID to it. follow these instructions:

• boot into windows


• open control panel


• find your Disk controller


• right click and choose properties


• chose the Details tab


• the first line contains something like this: PCI\VEN_30BE&DEV_004A...


• Vendor id is the 4 characters after the word: VEN_


• Device id is the 4 characters after the word: DEV_


• write on a paper the sting like this: 0x + VendorID + DeviceID (without plus or space for instance this example should be like this: 0x30BE004A)


• next stage involve using MacDrive and some util that will mount your install DVD ISO file (like alcohol), you need to mount the DVD after installing MacDrive that allows you to access Mac file system,


• cd into the folder:


• make sure you have at least these folders in there: AppleGenericPCATA.kext AppleOnboardPCATA.kext IOATAPIProtocolTransport.kext AppleIntelPIIXATA.kext AppleVIAATA.kext AppleNForceATA.kext IOATABlockStorage.kext


• also make sure you have the folder: /System/Library/Extensions/JMicronATA.kext (if you use a JMicron controller and IDE hard drive)


• next open in an editor the file: /System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/AppleVIAATA.kext/Contents/Info.plist


• find this tag: <>IOPCIPrimaryMatch< /key >


• after it you will find a tag: <> with allot of strings like you wrote on the paper in it.


• add your string (one you wrote on the paper, but first make sure it is not already there, if it is - abort this step (Solution 8) completely) with a space between it to the others (location isn't matter as long as it is in the tag like the others)


• save it


• delete the file: /System/Library/Extensions.mkext


• save the ISO file with these changes, burn it onto a DVD, boot from it with -F at the darwin prompt.

hope all these solutions help you,
ShayBC.

You might want to read these related posts:
Still waiting for root device
Darwin Boot Options
Download Hackintosh OS X Leopard
Blinking cursor after OSX86 install
Restore bootable partition

"Still waiting for root device"

This annoying statement ususally comes up befor DVD can boot or after installation before the OSX boots for the first time.

if you haven't used a Leo4All or did not use -v option then the screen will not look like the first image in this post but it will look like this (no entry sign/ stop sign/ no smoking sign without the cigaret):

What does this error mean?
well it means that the OS is set to boot from a drive and partition that does not exist.

for instance the Darwin boot loader is talled to boot from Disk1 (Disk 1= second hard drive (starting from 0)) and there is no such disk.

What can you do?
if you know the number of your Hard Drive then at the Darwin prompt (after boot press F8) write: rd=DiskX where X is the number of your OSX hard drive.

for instance if your hard drive is 0 (zero is the first hard drive) then write:
rd=disk0

if you do not know your hard drive then there is a try and error method of trying all the disk possibilities on your computer starting with: rd=disk0 then rd=disk1 then rd=disk2 then rd=disk3 etc.

another good option is to disconnect other HD and leave the OSX HD as first and write disk0.

How to set the RD for every boot?
once you succeed and don't want to write the rd parameter every boot, then write it in your boot plist file.
this is a file that configure the system boot parameters. the file can be found at: /Library/Preferences/SystemConfiguration
the file name is: com.apple.Boot.plist and you edit it as root and change the Kernel Flags value and add to it the rd parameter like this:

1. open terminal
2. write: sudo -s and press enter
3. enter your password when asked and press enter
4. write: vi /Library/Preferences/SystemConfiguration/com.apple.Boot.plist and press enter
5. in the vi editor use the arrow keys on the keyboard and navigate the cursor to the tag: after the <key>Kernel Flags< /key > line.
6. the string tag might be empty or not, if it is not empty then add space and then write: rd=diskX where X is your hard drive number.
7. press keyboard button Esc (in order to exit insert mode)
8. write: :wq and press enter (notice the : sign)
9. then reboot and thats it

here is a Bofore image of my file (it will help clear things up):

and here is the after image (note the space between the -v and rd parameter):

most common mistakes are to write full path to the drive like this: rd=/dev/rdisk0 or rd=disk0s2 instead of: rd=disk0. (only when you are trying to load the install DVD, not after the install has finished successfully).

the rule is that before the install (if the DVD will not load) then use the rdiskX format.

if you are after the install then use the rdiskXsY format.

Install Finished but "Still waiting..."

after the install has finished successfully and you get "Still waiting..." then you can use the partition value as well in this form:

rd=diskXsY

where X stands for the number of the leopard disk and Y stands for the partition number of the leopard disk. examples:

disk0s1 (first disk, first partition)

disk0s2 (first disk second partition)

BIOS options

there is another option that your bios is not set as required.

if you have a SATA hard disk, then they can support several work modes,

IDE legacy, or IDE native, or native AHCI, also there is a S.M.A.R.T mode that can be enabled or disabled, and the actual strings as always depends on your BIOS.

i also had an option of "Hard Disk Pre Delay" that gives the hard drive delay time in order to let the hard drive time to react after reboot and when disk is mounted or plugged in, i set it to 5 instead of default 0.

so you should play with these options until you cover all options one of them will fix your "Still waiting..." situation.

you should set it up as follow:

ATA/IDE Mode: Native

Configure SATA as: AHCI

S.M.A.R.T.: Enabled

here are some screenshots:

and a closer look:

Fdisk comes to the rescue

this option not always work, it didn't fix the problem forever, but i have successfully finished the install process.

follow these next steps:

1. boot from the install DVD into single-user mode
2. flag any partition other then the leopard partition as bootable
3. then you reboot, again from the install DVD into single-user mode
4. next flag back the leopard partition

thats it it should help, if you have any problem please post here,

Enjoy.

HFS+ partition type changed - what to do?

if you have for some reason a partition that is not recognized as HFS+ but it is (for instance if you tried to resize using Gparted and the HFS+ converted to something else), this is what you do in order to fix it:

enter fdisk, once you have entered fdisk and pressed p for print it will display a table with partitions details looking like this:



Note the second column (id), it is telling us what is the type of the partition in a hex representation. the HFS+ partitions should have AF as ID.

if it is not AF and the last column does not say HFS+ then use the command:
setpid X (where X stands for the partition number)
then the fdisk will show the partition table just for the X partition and ask for the partition ID you want to set like this:



write AF as the ID and press enter.
u (stands for Update)
w (stands for write)
it will tell you that you need a reboot like this:



write y (stands for yes)
q (stands for quit)

reboot, your done.

Enjoy.

Restore bootable partition

You have recently installed kext, application, update, another OS on a different partition and after boot all you get is a blinking cursor, and no darwin boot, and system not booting.

this post will explain step by step how to turn your partition back to a bootable state.

Data you should know.

you need to know what are you hard disk and partitions configuration,

• how many drives do you have
  
• how many partition on each drive
  
• what OS and File System is installed on each Partition
  
• what OS you would like to restore as primary boot loader

Solution 1:
first solution is accomplished using the "GNU Gparted Live CD", it is free Linux based application, you can download it here as an ISO file, you need to burn the iso file on to a CD and boot from it.

once you boot from the Live Cd you see this screen:


in the upper graphic parts you see square shapes that each represent a partition, above them there is a drop down that display the currently selected hard drive (in this case hda and its size is 37G), in linux (as in mac) drive is represented as file under folder dev, so the first drive is: /dev/hda.

if you choose from the drop down another driver it will display that drives partitions.
the lower table display the partitions in more details, you can see in this example that the first partition is NTFS, and it has the boot flag marked, that means that the NT file system will be booted from.

one of the thing you can do, is set a partition to being a bootable by setting the boot flag to it. you do that by right clicking with the mouse on the desired partition and choosing "manage flags" , from the pop up window check the boot flag check-box, close the window and click the "Apply Changes" button after it finish, reboot, and your HFS+ file system should be bootable again.

Solution 2:
there is another option to do this from command line using the fdisk utility available from the leopard DVD.
steps:

1. insert the Leopard install DVD and boot from it
2. at boot time press F8, and you will see the darwin boot screen
3. write -s and press enter this will enter "Single User" mode
4. execute the two lines that appear there regarding fsck and mount as described in the "Single User" post.
5. next enter these commands:

fdisk -e /dev/rdiskX (where X stands for your leopard install hard disk number (first one is 0 second is 1 etc.))
then in the fdisk utility write ? for list of commands (help screen)



write p (short for print) and press enter then it will display a table of disks and partitions
find your HFS+ partition and remember its number (if it is the first partition it will be 1)
next write: f X where X stands for the HFS+ partition probably 1 if it is the first partition,
next write: u (short for update) and press enter
then write: w (short for write) and press enter
lastly press q (quit)
then restart and the HFS+ partition should be bootable again.

so for summary, the commands should look like this:
boot single mode (after restart press F8, at the prompt write -s and press enter)
/usr/sbin/fdisk -e /dev/rdisk0

f 1

u

w

q

Reboot

if these solutions did not help that means one of two things:

1. you have just installed Leopard and did not install Darwin as described in the "Install Leopard" post.
2. or for some reason your partition ID has changed from AF to something else causing the HFS+ file system to recognized incorrectly.

the first case is solved by simply installing the darwin from the DVD.
the second case can be solved from the fdisk utility instructions in this post.

Enjoy.

(All About) Boot into Single User

What is "Single User"?

"Single User" is a boot mode, you actually tells the unix shell that the OS should load only prompt (no GUI), and the local console login is the only login available (can't be logged on from the network),

Why would you like to do that?

sometimes the system requires an administrative actions by the administrator, such as disk checkup, partition altering, drivers uninstalling, backups, etc.

at this delicate tasks you don't want other users to touch/create/remove/use files, hardware, CPU, and use resources. this is why you enter into single user mode.

What can you do in "Single User" Mode?

since single user mode is for administrator and no GUI is available then every task you can do from terminal (command line) as root user you can do here, which is practically everything (on the current system) it wasn't meant to be used for regular work such as surfing the web (there is no network) or reading files etc. you can use all the unix commands available for OS X and all the command line utilities and applications available on that machine.

How to enter Single User Mode?

1. Restart your computer
   
2. Continuously press F8 until you see the Darwin boot prompt
3. write "-s" without the quotation marks and press enter (for real mac do this instead)
4. you will soon reach a prompt
5. note the lines written to the console about fsck and mount
6. write: /sbin/fsck -fy
7. press enter and then the system should write:
   ** The volume XXX appears to be OK
   or
   ***** FILE SYSTEM WAS MODIFIED *****
   if it is the second option, then repeat the fsck command (6) until you get the first line saying the volume is OK
8. write: /sbin/mount - uw / this will mount your file system
9. thats it you are in "Single User"
   

Enjoy.

How to read and understand Kernel Panic Screen

here are some Panic messages example and how to read them:

example 1:

Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000030D6334E PC=0x0000000027B5CD3C
Latest crash info for cpu 0:
Exception state (sv=0x27CA4500)
PC=0x27B5CD3C; MSR=0x00009030; DAR=0x30D6334E; DSISR=0x40000000; LR=0x27B5CD24; R1=0x0D80BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27B5E6C4 0x27B5D82C 0x27B5607C 0x27B45C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x8001016C
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x27b3a000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x1d8f7000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x27867000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x2788b000
dependency: com.apple.NVDAResman(4.1.8)@0x278a1000
Proceeding back via exception chain:
Exception state (sv=0x27CA4500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x1D92D280)
PC=0x9000B348; MSR=0x0200F030; DAR=0x02A8A000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call)


Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x27CA4500)
PC=0x27B5CD3C; MSR=0x00009030; DAR=0x30D6334E; DSISR=0x40000000; LR=0x27B5CD24; R1=0x0D80BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27B5E6C4 0x27B5D82C 0x27B5607C 0x27B45C74 0x002E9A80 0x002EB94C
0x0008C248 0x00029234 0x000233F8 0x000ABEAC 0x8001016C
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x27b3a000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x1d8f7000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x27867000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x2788b000
dependency: com.apple.NVDAResman(4.1.8)@0x278a1000
Exception state (sv=0x1D92D280)
PC=0x9000B348; MSR=0x0200F030; DAR=0x02A8A000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call
*********

OK you should understand that what happened here is that the OS has stopped working since it has a problem, the first thing it does is look for a debugger to pass the control to (since this is not a Mac OS X developer station it will not find one), next thing it will do is dump to the screen all the data it can on the incident so you or a qualified technician can understand what the problem is.

the first part (blue part) display data of the CPU registers, program control exception state for CPU number 0 (this is your first CPU) at the time of crash, this data is hex address in the memory, it will not do you much good unless you are a mega advanced user.

next part Backtrace (green part) also uses hex memory address to point the command the CPU ran before crashing, again will not do us any good.

next part (bolded black) is still regarding backtrace (what happened before the crash), but it tells us what modules (usually kext) where loaded, usually this part can tell us allot, since this loading sequence ended with crashing the OS. in this section we see the last loaded module (in this example the GeForce) and the modules it depends on that needed to be loaded before it so they probably did not cause the crash since they are already loaded (although still possible that they are the fault - but rarely they are).

next part (Red part) is the exception chain, again stating the data as hex memory address and the CPU registers, will not help us.

last interesting part is the kernel version part (orange part) this part will state what kernel you are using, name version build date and platform in this example:

Darwin

8.11.0

oct 10

PPC (Power PC)

the rest is the same data from the caller point of view but you might find different data there (i never had).

Conclusion 1: the problem is with the GeForce kext.

Example 2:

panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000024, CR3: 0x00d7b000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x02bacc00, ECX: 0x025dc9a4, EDX: 0x00000000
CR2: 0x00000024, EBP: 0x14053ef8, ESI: 0x00841684, EDI: 0x0083df64
EFL: 0x00010206, EIP: 0x003bd3b3, CS: 0x00000008, DS: 0x14050010

Backtrace, Format - Frame : Return Address (4 potential args on stack) 
0x14053d38 : 0x128d08 (0x3cb134 0x14053d5c 0x131de5 0x0) 
0x14053d78 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670) 
0x14053e88 : 0x19ada4 (0x14053e98 0x14053ea8 0xe 0x48) 
0x14053ef8 : 0x83df81 (0x2bacc00 0x841684 0x14053f28 0x38073e) 
0x14053f28 : 0x39c536 (0x2bacc00 0x28b9880 0x8 0x2) 
0x14053f78 : 0x13d7d9 (0x28b9880 0x2686021 0x0 0xbffff378) 
0x14053fc8 : 0x19ac1c (0x0 0x0 0x4 0x207) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.IOBluetoothHIDDriver(1.7.2b2)@0x8 37000
dependency: com.apple.iokit.IOBluetoothFamily(1.7.14f14)@0x6be 000
dependency: com.apple.iokit.IOHIDFamily(1.4.10)@0x531000

Conclusion 2:we probably have a problem with the Bluetooth kext.

so up to here it was easy and straight forward, the next doesn't have the loaded module part.

Example 3:

Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x00000000000819E8
Latest crash info for cpu 0:
Exception state (sv=0x3D849280)
PC=0x000819E8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x000819CC; R1=0x2720BB00; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032AC8 0x000823DC 0x00075F58 0x00075918 0x0006B45C 0x0006B730 
0x000578A0 0x0002921C 0x000233F8 0x000ABAAC 0x414C5945 
Proceeding back via exception chain:
Exception state (sv=0x3D849280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42AF9280)
PC=0x9000AB48; MSR=0x0000F030; DAR=0x011DB004; DSISR=0x42000000; LR=0x9000AA9C; R1=0xF0101080; XCP=0x00000030 (0xC00 - System call)

Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780 
Proceeding back via exception chain:
Exception state (sv=0x3D849280)
PC=0x000819E8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x000819CC; R1=0x2720BB00; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032AC8 0x000823DC 0x00075F58 0x00075918 0x0006B45C 0x0006B730 
0x000578A0 0x0002921C 0x000233F8 0x000ABAAC 0x414C5945 
Exception state (sv=0x42AF9280)
PC=0x9000AB48; MSR=0x0000F030; DAR=0x011DB004; DSISR=0x42000000; LR=0x9000AA9C; R1=0xF0101080; XCP=0x00000030 (0xC00 - System call)

Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC

*********

Conclusion 3: so this can happen for several reasons:

1. first option is a random memory access error, meaning that the memory has been accessed to an area that wasn't expected or allowed, maybe even an application has written into memory that it shouldn't have (that was not its space) and by that caused the OS/kernel to crash, you should check what recent applications/utilities/kext/bundle/plugin/login items you have installed and remove it or disable its launch for a while until you can sort it out.

2. second option is usually the case for real macs but also possible for PC, as simple as a hardware problem, or bad memory card that causing the problem, maybe it act badly only if it is cold (immediately after booting the machine) or when it is hot (after several hours of work, depends sometimes minutes is enough on a sunny day), another hardware problem can be any hardware that access memory asynchronously, like IO (bluetooth card, modem, wifi, network card, etc.).

3. another option is that your combination of kext and bundles is not working (maybe versions of them some are older then should be?) so for such a case i always keep a bootable/loadable System/Library/Extensions folder on the disk.

4. this option is rarely the case, but can happen, if the main boot partition doesn't have enough free space it could cause the problem, so all you need to do in this case is to boot in safe mode and free some space.

5. another simple option is the case of a kext/application/kernel trying to access a file that it doesn't have a permission to access to, this can be caused due to wrong unix file mod, in this case boot into single user and fix permissions.

6. last option (that i can think of) is a bad kernel, so since the kernel itself is badly behaving that is why there are no kext loaded yet, since the kernel hasn't finished loading the core. this is why i keep a spare bootable/loadable copy on the disk so i can boot from it on a rainy kernel problem day.

so here are some articles like 10 things to do in order to get rid of the Panic:

The X Lab FAQ

General steps in OS X troubleshooting

Twenty steps to help diagnose and fix system issues

Enjoy (from a Panic? how can you?).

Automate your Apple Darwin Boot flags

are you tired from pressing F8, and writing -v cpus=1 -x -f etc?

now you can rest, lets tell leopard to remember the setup we want.

login as "root" to leopard,

from finder goto: /Library/Preferences/SystemConfiguration

then open for edit using your favorite editor the file: com.apple.Boot.plist

Note: you can also do this from your login using terminal like this:

1. sudo -s
2. write your password and press enter
3. cd /Library/Preferences/SystemConfiguration
4. nano com.apple.Boot.plist

the boot plist file is an XML file, so next you find this section:

Kernel Flags

and in the String tag enter your flags as if you were entering them in the darwin boot prompt

it should look something like this:

Kernel Flags

-v cpus=1

save the changes and reboot.

b.t.w.

in command lime you may also use vi instead of nano, in case you don't know how to operate them here are links to a dummy guide:

Beginner's Guide To The VI Editor

UBUNTU Nano HowTo

Enjoy.

Install new Kernel / Boot from alternate Kernel

this post will display how to install new kernel,

and it will also display how to boot 

from alternative kernel, 

plus some trouble shooting advices.

1. what is a kernel?

Kernel is the core and center of the OS, it interface the hardware and it is the nearest code to hardware there is, it gives the OS and the applications services on the computer (such as CPU, memory access, threading, networking, filesystem etc.) for further reading you can refer to my dev blog post: Kernel Basics.

2. why would i like to update it?

the reasons mostly comes from bug fixed, features added to hackintosh and not available with the version you are using, or just to know you are up-to-date (any new post in insanelymac, netkas or on the net will relate to your version), if you are not confidant in your abilities to update the kernel, then avoid it until you must, it can crash your system (although can be easily reversed)

3. where can i get new kernels?

• EFI supported kernel are available at netkas blog links from the irc channel.
  
• you can also download the latest kernel and its relevant kext from the open source darwin project, compile it, and patch it using netkas EFI patch using this procedure(for more advanced users - not recommended).

4. how to install new kernel?

once downloaded (probably from netks blog) backup your current kernel (/mach_kernel), copy it to the root file system and rename it to "mach_kernel", fix permissions, and your done.

now for the step by step procedure:

a. download the binary mach_kernel file into a folder (for instance desktop)
b. copy the file from downloaded folder (e.g. desktop) to the root folder

• open terminal
  
• write: sudo -s
  
• enter your password when prompt and press enter
  
• cp ~/Desktop/mach_kernel_9.2 /

c. backup your current kernel by renaming it

• mv /mach_kernel /mach_kernel_9.0
  

d. rename the downloaded kernel to the mach_kernel file name

• mv /mach_kernel_9.2 /mach_kernel

e. fix permissions and reboot

• chown 0:0 /mach_kernel
• chmod 755 /mach_kernel

5. how to boot from alternate kernel?

if you do not trust the downloaded kernel, you can ask darwin boot loader to load from a different kernel file, just by stating the full path of the kernel as the first parameter in the boot prompt.

for instance if the downloaded kernel name is: mach_kernel_9.2 then you copy it to the root of the files system using finder or terminal, (from command line: cp mach_kernel_9.2 /).

next, in the boot prompt you write: /mach_kernel_9.2 -v

i added the -v so you can see where other parameters goes.

6. what if something goes wrong?

you can easily reverse the procedure, first you can use the boot from alternate kernel, and booting into the backed up kernel (/mach_kernel_9.0 as first parameter to darwin boot loader).

second you can boot from the install DVD into single user mode, mount the file system and rename the new kernel, copy the backed up kernel as /mach_kernel file name and reboot (i will add a post regarding single user boot, mount, and other unix shell commands needed for the procedure).

here is a 3pg video displaying several options of booting from alternate kernel file. (poor qulity video, opens with QuickTime)

Enjoy.

Install Leopard - iATKOS_v1.0i

this is a continue to the "BIOS Options for hackintosh" post

this post will be a screen-shot guide of how to install Leopard on a PC,
if this is the first post you read regarding this issue please read the previous sections they will save you a lot of troubleshooting in the install process,

this guide is based on iAtkos 1.0i 10.5.1 without the 10.5.2 PPF, the installation DVD i used is an upgrade and require a pre installed Mac, i used for that an iAtkos tiger install, in order to see the tiger installation post refer to the "Install Tiger" post, another solution is to download a full installation of leopard (not an upgrade), i know there is a Kaliway and uphack iAtkos versions of it.

these screenshots comes from my LG W1 Laptop, it has this hardware mounted on it:

• Core2Duo 1.83Ghz x2 (only one working when the other is enabled i get a reboot loop)
  
• 2G DDR2 667
• 120G SATA HD (can support RAID)
• PCMCIA Texas Instruments Card Reader
• Dual-Layer DVD Burner
• USB 2.0 x4 or USB 1.0 x2 + USB 2.0 x2 (both successfully supported)
• ATI X1600 Mobility (working with ATIinject)
• Sound Card (internal speakers not working)
  
• 17" LCD
  

yet i have successfully installed this leopard version in more the ten computer types, including laptops and desktops (though i didn't try AMD yet, i have one at home waiting to do just that, it will require a different leopard version one that supports SSE2, i will add a post regarding that), among them Core2Duo, 1G/2G, internal HD/External HD, WIFI, ethernet cards, cable internet, ADSL, LCD, CRT, bluetooth, etc. if you want to know if your PC will be supported check the OSX86 HCL (Hardware Compatibility List)

lets begin, first insert the burned DVD (i used alcohol 120% with generic format to burn the copy)


next turn the computer on, so it will boot from the DVD (make sure the BIOS is set to boot from DVD first)


after booting you see a screen similar to this, counting backwards, and notifying that it is loading the Darwin boot loader, allow it to proceed until you see the next gray apple screen


next you see the apple boot screen this should take between a minute to 5 minutes


in the meanwhile connect a USB keyboard (if you are on a laptop it is a good bet that the internal will not work out of the box), in desktop try not to mix mouse and keyboard ps2 with USB, ether both USB or both PS2 (although it can work mixed).


i use a silicon roll up keyboard so it bothers me less (but it still bother)


next you see the 'About' screen of the install and the 'About' message was removed and what left is just "Click Next" message so go ahead an click next


the 'next' button is in the lower right side of the screen


a progress indication dialog appears should take up to 1 minute or so


next a 'Welcome' screen appears and since this is a tweaked leopard install you see the hacker group message here, mine say iAtkos + version, click Continue


next screen should have been the Apple License agreement but here we get the iAtkos group "readme" file content, use only English language and click Agree


now the fun begins, this screen ether display hard drive partition that you can install leopard on, or not most of you will not see the Hard drive icons, don't worry about it we will soon create one that will be visible, and usable, if you see one and want to use it as your install partition then click it and jump the "Darwin Install" step.


next click on the "Utilities" menu from the upper menubar


and choose "Disk Utility", the screen will be replaced by the disk utility application


in this screen you see a center section that is empty for the moment and on the left you will see all the disks and partitions available on your PC, on the upper part you see an icon bar that can perfom several operations on the selected disk/partition


select the partition you want to erase (and install leopard on) from the left disk/partition tree, immediately you see the center changes allowing you to see summary info on the selected partition and perform operations like erase, create, format, fix etc.


from the center part of the screen press the Erase tab


choose a volume format, Mac OS Extended (Journaled),
in the name text field write the name of the partition (this is the name of the HD icon on the Mac desktop and the name of the boot partition you will see in the Darwin boot screen, so choose it carefully, i think only English is supported, try not to use spaces in the name and it is Case sensitive), i used Leopard2 in this example, and click the "Erase" button


next you get a popup screen (in mac its rather a scroll down) that asking you to confirm to erase the partition looking like this: (click the erase)


next the partition is erased and a progress bar indication available at the bottom of the screen, after the erase finish you see a complete message and on the left partition/disk tree there is a new icon of the recently formated/erased mac partition (leopard2 in this example), close the "Disk Utility" window and exit to the main install window


Darwin Install:
after the disk formatting you should be able to see its icon in the main screen, do not select it yet we need to finish one more step, that is the installation of the darwin boot loader it is responsible to initialize all the kext(Kernel extension) and boot the system, also we will install the EFI system that will allow to run a vanilla kernel.
from the Utilities menu in the menu bar select Darwin Boot


next the main screen disappear and a terminal window appears elaborating on the procedure, go ahead and read it,


at the end it ask you: do you want to continue, press y


it asks you to write the number of the Hard Drive you want to install Darwin on (the drive that will be bootable and mac will be installed on it) use the drive that you recently erased (it should be available from the data you gathered in an earlier stage), please note that every hard drive number should be added 1 to it so for instance your first driver (number 0) you should enter here 1 instead, etc.


next comes the partition number write the real number (first is 1, second partition on that disk is 2, etc.) (sorry i dont have a screen shot for that one).

last step is to install the EFI (it works on most PCs, if it won't work on yours, just reinstall and skip the EFI part), EFI allows the hackintosh to operate as a real leopard, including Software Update and several kext (drivers), it uses a vanilla kernel code,
so in the next question: "Do you want to install boot EFI" press Y (sorry no screen shot for this one as well).

lastly you will be asked: "Are you sure? " (for all the previous answers you gave), if you answer yes the darwin and EFI (if you selected Yes on EFI question) will be written to the disk and partition you selected, if you answer no all will be discarded and you can redo this part and reselect your options.
write Y, after the darwin install is finish it will write exit, logout, [Process Completed], the install takes 5-10 seconds


after the install is completed we need to flag this partition as bootable, this will allow you to boot from the newly installed partition,
to open a new terminal window from the Shell Menu, choose new Window->Homebrew


a new terminal window appears, enter the fdisk CLI (Command line interface) using this command:
/usr/sbin/fdisk -e /dev/rdisk0
replace the last number (in this example 0) with the your leopard install HD number


you can use question mard (?) and see the command list


write p (short for print) it will display you with all the available partitions on the selected disk, including details such as size, type etc. you will also see an astrik sign (*) next to the current bootable (flagged) partition, in this example case its 2.


flag your partition to be bootable using the command:
f 1
(f is a short for flag) replace the number 1 with your installed leopard partition


after you do that you can see there is an astrik sign (*) next to your prompt indicating that a change has occurred and no commit has been applied, you can use p (print) again, to make sure that the appropriate partition has been flagged


now write u (short for update)


and w (short for write)


the astrik sign (*) has disappeared from your prompt indicating all changes have been applied, you can write q (short for quit)


once finished with the fdisk utility we can exit the Terminal application, you do that by clicking the Terminal Menu->Quit Terminal from the menubar it will bring you back to the main install window


now select the icon of the partition you want to install leopard on (the same partition you erased and named, same one you installed darwin on) and click continue


now you get to the actual install screen (after all the preperation)


in the lower left corner there is a Customize button that, press it.


it opens a window that allow you to select what components to install, if you know what you are doing then check your selection, if you are a beginner with hackintosh select only the ones that are marked in the image, note select EFI only if in "Darwin Install" you selected Yes in the Install EFI question, otherwise uncheck it.


when you finish click on the Done button in the lower right corner


you will returned to the "Install Summary" screen, press the install button


a popup (or scroll down) will appear and perform a checksum on the Install DVD to make sure all the files are correct intact and original, you can select to wait 2-3 minutes, or press skip


after the validation part is done (or skip is pressed) the OS file copy stage begins, this will take time, lay back and relax


the progress window looks like this:


when the install process finishyou get this "Install Succeeded" screen and it will stay this way for 30 seconds, waiting for you to press restart, if you don't it will automatically restart anyway


before it will boot back up, eject the install DVD, you will not need it any more (for this install)


after the BIOS screen press F8 so the darwin boot screen will load


make sure you see the recently installed partition with the name you gave it (my example "Leopard2"), select it and press enter


now you see the apple gray boot screen


if all went well you will soon see (and hopefully hear) the great apple "Welcome video", you cannot press esc and stop it, so enjoy it until it ends and the next customization screen set appears


first screen is the region selection screen, select your region, if you cant see it check the the lower "Show All" checkbox


next is the country selection screen, choose your country, if you cant find it check the lower "Show All" checkbox


next is the keyboard layout screen, select your keyboard layout, if you cant see the one for you check the lower "Show All" checkbox


next screen is important, it gives you the opportunity to migrate data, setup, application etc. from an existing mac installation, if you have an upgrade install DVD version of leopard then you must have an earlier install of mac OS (like Tiger, check the "Install Tiger" post), if you don't have an upgrade install DVD you can choose the last option "do not transfer my information now" and click "continue", but if you have an upgrade version and you have previously installed a Tiger version on this PC then just choose: "from another volume on this mac" and click "continue", note: if this is an upgrade version DVD and you have not installed Tiger after you click "continue" it will go back to the "welcome video" stage and it will do that only 3 times after that the installation will be corrupted.


if you choose to transfer the information from previously installed mac, then this screen appears, asking you to select the data you want to transfer (you must select at least one user), make sure you have enough disk space and click transfer.


a transferring progress indication screen appear, it will take time depending on the size to transfer.


next it will ask you to select your internet connection type and set it up, it can be done but i prefer for first install to do only what has to be configured so i can see the leopard is launching and not that the internet connection has failed the installation, this wizard can always be activated from within leopard,


next it will display the registration sceen, fill in the fields and press continue


now it will warn you about fields you forgot to fill or filled incorrectly or if the email is invalid, ether fix the data (if it will not allow you to continue) or press ok to ignore


next the more questions screen appear asking you where do you use this mac and what describes your uses for it, and you may check the ckeckbox in order to be notified of new sales and new products etc. by email (don't check this checkbox)


next it will ask to send the registration info to apple, obviously you select "register later" and press continue.


next the set the date and time window appears allowing you to set the clock, set it and press continue.


now it will remind you not to forget to register with apple, press Done.


thats it in a minute you will have a leopard system working, now just calibrate your keyboard, so leopard will load the appropriate code for it, press continue.


first it will ask you to press the key next to the left shift,


in my case it is Z, click it once


next the screen changes and ask you to press the key next to the right shift,


in my case it is the question mark key (?) press it only once,


next it should notify you that the keyboard has been identified and allow you to ether press done or change the identification from the options available, (leave it and press done)


next you will see the leopard login window (actually the hackintosh hacked login screen) choose your user enter the password and click login


lastly you should see the leopard desktop and dock.


thats it, if you have problems or questions send a post here, if you succeed send your success story in insanelymac and your hardware setup in the OSX.org HCL Page,

Enjoy your Mac.